Joined
·
430 Posts
Is the valve clearance for the 8/06 cam the same as the stock one? Or different. If different, please spec. Thank you
Valve clearance for 8/06 cam
Join the discussion
Recommended Reading
-
XC Engine/Carb/DrivetrainI need some advice. i bought an engine whit 10 hours (Race hours) since is last rebuild to a famous Rider/builder in spain. The engine was from a customer of him (Good friend of him, rider to), but is him how do the rebuild, and is him ho was selling it. Here the list of wat have 10 hours...
- 7
- 394
-
NeSta75 · updated
-
XC Engine/Carb/DrivetrainHi guys, i have noticed my ktm 525xc is losing oil from where the engine case splits in two. At first I replaces the rubber on the electric start thinking it was the problem, but it wasnt and upon looking closer its coming from the crank case seal. Any good ideas apart from opening the engine up...
- 6
- 2K
-
XC Engine/Carb/DrivetrainLike the title says, 1 week turn around and I got my FastRanchero Modded carb back in the mail today. Just got her installed, but with living in a town house, neighbors with kids under 1 on both sides of me and the fact that it is 9:38............ I can't fire her up just yet!!!!! I will...
- 36
- 8K
-
XC Engine/Carb/DrivetrainHello! After reading countless threads and posts on here to find my issue with my 450 xc. I have been trying to solve this issue for almost three years. It would run awesome once it starts up and run as it should till it get to operating temp then it just dies. Wait for 15 mins or so it does it...
- 3
- 306
-
XC Engine/Carb/DrivetrainHi everyone ! Bad day for me :cry:, after 65 hours since my last rebuild, i had, what we can call a "catastrophic failure", i was riding to meet some friends for our ride day, but after living my house, less than 1 km, my engine sudenly make a strange noise (like brrrrrrrrrrrr), and dont move...
- 6
- 443
-
NeSta75 · updated
Join now to ask and comment!