KTM ATV HQ Forums banner

1 - 20 of 22 Posts

·
Registered
Joined
·
153 Posts
Discussion Starter #1
What is the size of the rear rims on the SX?
 

·
Registered
Joined
·
153 Posts
Discussion Starter #3
stupid question-so tires that are 20x11x9 are to big for the rim correct?
 

·
Registered
Joined
·
880 Posts
Yep to BIG
 

·
Registered
Joined
·
153 Posts
Discussion Starter #5
so can you put the SX rear rims on a bigger tire then 18?
 

·
Registered
Joined
·
1,365 Posts
Ya you can put a 19 or 20 inch tall tire on just as long as it is a 8 inch diameter tire.
 

·
Registered
Joined
·
153 Posts
Discussion Starter #7
ok guys got it ,thanks for dealing with my stupidity with tires. :p
 

·
Registered
Joined
·
1,365 Posts

·
Registered
Joined
·
153 Posts
Discussion Starter #9
got one more question about the hipers in the back,if you take off the ring can the tire just slip off?
 

·
Registered
Joined
·
1,365 Posts
With the dual beadlocks yes. With the single you still have to break down the back bead. But if you use wd-40 from day one its very simple.
 

·
Registered
Joined
·
153 Posts
Discussion Starter #11
With the dual beadlocks yes. With the single you still have to break down the back bead. But if you use wd-40 from day one its very simple.
guess i have to bulk up on wd-40 when i get the SX. Lol
 

·
Registered
Joined
·
1,365 Posts
Its not bad. If you have a Harbor Feight, they have a atv/goldcart tire machine for around 40-50 bucks. I use mine A LOT!!!!

here it is

http://www.harborfreight.com/cpi/ctaf/disp...temnumber=34542

Sometimes you will feel like a monkey doing you know what to a football with it. But it get the job done!
 

·
Registered
Joined
·
153 Posts
Discussion Starter #13
Its not bad. If you have a Harbor Feight, they have a atv/goldcart tire machine for around 40-50 bucks. I use mine A LOT!!!!

here it is

http://www.harborfreight.com/cpi/ctaf/disp...temnumber=34542

Sometimes you will feel like a monkey doing you know what to a football with it. But it get the job done!
lol Nope,none of them down here in florida. Usaully i go to my buddys tire shop around the corner from my house and he seperates the tire for the rim,but it is harder to do the rear because of its diameter and the machine is only ment for car tires.
 

·
Registered
Joined
·
1,365 Posts
Some nice tire spoons work too then ;) Just A LOT more monkey vs football action :D
 

·
Registered
Joined
·
880 Posts
With the dual beadlocks yes. With the single you still have to break down the back bead. But if you use wd-40 from day one its very simple.
WD-40 is not good for rubber use silicon spray , windex or soap with water
 

·
Registered
Joined
·
153 Posts
Discussion Starter #16
ughh,no i have to stock up on windex.lol
anything to keep my SX in tip top shape in shall due.
 

·
Registered
Joined
·
1,365 Posts
WD-40 is not good for rubber use silicon spray , windex or soap with water

Hmmm, when Hipers came out and I ordered them I remember them saying to install the tires with wd-40... Ive never had any issues...And I have been using hipers and wd-40 for many years now too
But I do agree
 

·
Registered
Joined
·
153 Posts
Discussion Starter #18
if anyone find Razor II's in 20x11x8 or with 8inch rim size can you please send me the link.
Thanks
 

·
Registered
Joined
·
153 Posts
Discussion Starter #19
what is the off set of the rear rims? (3+2) (3+5)
 

·
Registered
Joined
·
1,365 Posts
1 - 20 of 22 Posts
Top