[Big Orange]

I finally got around to installing my ktm mx arms and went practicing today. The calibration is very soft, but mostly I felt my heels draging in a couple areas, like an uphill step up and a long high speed step down/table top. My ride height is 7 1/2"-7 1/4" which should be fine so apperently I need stiffer springs.
My question is how much stiffer? Does Ktm offer stiffer springs or do I have to deal with Ohlins Direct? Rocket Ron, got some wisedom to share?

 

[rocketron racing ktm]

just with the testing i have done the stock springs are to light for pure moto cross yes you need to go stiffer springs and defferant valving i can help

 

[SCLATER29]

just with the testing i have done the stock springs are to light for pure moto cross yes you need to go stiffer springs and defferant valving i can help

hey ron do you have an australian agent, if not any reccomendations down this way

 

[kiwi-craig]

sclatter: Crown Kiwi Technical in NZ is a long time established Ohlins agent / service centre.

CROWN KIWI TECHNICAL, 11 MANADON ST, NEW PLYMOUTH NEW ZEALAND

Ph / fax +64 6 751 2100

[email protected]

 

[Lost Down Under]

Aussie Ohlins agent is in Melbourne.

Steve Cramer Products