need help adjusting valves
1 - 4 of 4 Posts
Thanks wanted to make sure. Also do you have a link that would help all I can find is for the dirt bike don't think I would have to remove the radiator like in the bikes.
Joined
·
522 Posts
Remove front plastics, seat and tank.
You get to the top end real easy.
You get to the top end real easy.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
FAQ's & How-To'sHey just got my 2006 KTM 250sxf rebuilt for the second time and for the most part it runs as it should. Although now there is intermittent valve train noises,(as if it was getting no oil). When it makes the noises it also raises in rpm, not a lot, maybe a couple hundred. The valve train is...
- 0
- 959
-
FAQ's & How-To'sHey I just rebuild a 2006 KTM 250sxf. Got it all back together. The bike ran before I bought it (it was seized when I bought it). Bike starts and revs on the choke but as soon as I turn the choke off it dies. It will start and idle off the choke but that's it. Everything in the motor is brand...
- 3
- 797
-
FAQ's & How-To'sHi all, New to this forum, but already liking it based on what I've read so far. Well, I picked up a white 525xc a few months ago, gave it a general service, and took it to Glamis for a week over the Christmas holidays. Love the bike, but had a few niggly issues, which leads me to these...
- 12
- 2K
-
FAQ's & How-To'sAfter very extensive dyno testing on the KTM SX and XC ATV model we developed a way to ELIMINATE the dreadful bog that we all have experienced on our machines. WARNING: USE THIS INFORMATION AT YOUR OWN RISK; WE AREN’T RESPONSIBLE FOR ERRORS IF YOU DECIDE TO PERFORM THESE MODIFICATIONS...
- 26
- 13K
-
FAQ's & How-To'sThere is a ktm 525 xc for sale on craigslist and these are his words in his description "Clean ktm 525 xc good tires everything's tight , new valves new valve seals , ported & polished ! Have the slip to prove it . Put it back together and now it won't start , back fires and thats it. Also have...
- 3
- 3K
Join now to ask and comment!