KTM ATV HQ Forums banner

Measurements on KTM FCR-MX 39mm

Jump to Latest Follow
1 - 5 of 5 Posts
L

·
Premium Member
Joined
·
630 Posts
Discussion Starter · #1 ·
Help guys,

Need help with the total length of the stock KTM ATV 39mm FCR Carb from the front (The front most edge of the intake that goes into the boot on the head) of the carb to the end of the bell intake on the rear of the carb.
Also the diameter of the intake bell that the air filter boot clamps onto...Thanks!!

Talked to Chad at Sudco and he will sell a 41mm FCR-MX for $695 shipped, he just requires these measurements...thanks for any help...
 
kiwi-craig

·
Administrator
Joined
·
4,264 Posts
#3 ·
bore the stocker to 40.5 - 41 no problems ???
 
Save Share
Reply
L

·
Premium Member
Joined
·
630 Posts
Discussion Starter · #4 ·
Bronson90 said:
yeah i saw that a while back; too rich for my blood... so i picked up a 41 fcr mx off of a 04 crf on ebay for 0...
Click to expand...
Bronson, did the 41mm off the CRF work OK is it the same length so the air boot will fit...any other adjustments required?...I am getting different stories...
 
B

·
Premium Member
Joined
·
1,477 Posts
#5 ·
LTZ470 said:
Bronson, did the 41mm off the CRF work OK is it the same length so the air boot will fit...any other adjustments required?...I am getting different stories...
Click to expand...
works perfect... i needed a honda throttle cable and that was it!!! same exact dimensions as the stock 39 off the ktm.
 
1 - 5 of 5 Posts
Recommended Reading
Read More
  1. XC Engine/Carb/Drivetrain
    So the HRC needle (NGPR) is no where to be found. Just curious if there is a close equivalent? Is it worth doing the FastRanchero mods with any needle? Or are the mods necessary because of the HRC needle specs? Woodward Specialties offers two different needle options under HRC Kits on the...
  2. XC Engine/Carb/Drivetrain
    This weekend I am taking my KTM 525xc to a race; and after trial and error I’m confident in my issue. I believe that my lack of spark is due to my throttle position sensor not being engaged (from poor throttle adjustment) within the carburetor. The only problem is, is I don’t know what to adjust...
  3. XC Engine/Carb/Drivetrain
    Hello! After reading countless threads and posts on here to find my issue with my 450 xc. I have been trying to solve this issue for almost three years. It would run awesome once it starts up and run as it should till it get to operating temp then it just dies. Wait for 15 mins or so it does it...
  5. XC Engine/Carb/Drivetrain
    I need some advice. i bought an engine whit 10 hours (Race hours) since is last rebuild to a famous Rider/builder in spain. The engine was from a customer of him (Good friend of him, rider to), but is him how do the rebuild, and is him ho was selling it. Here the list of wat have 10 hours...
  6. XC Engine/Carb/Drivetrain
    Hi guys, i have noticed my ktm 525xc is losing oil from where the engine case splits in two. At first I replaces the rubber on the electric start thinking it was the problem, but it wasnt and upon looking closer its coming from the crank case seal. Any good ideas apart from opening the engine up...
Read More
About this Discussion
4 Replies
3 Participants
Last post:
Bronson90
KTM ATV HQ Forums
A forum community dedicated to KTM ATV owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
XC Engine/Carb/Drivetrain KTMATVHQ.com Lounge For Sale/Trade SX Engine/Carb/Drivetrain Pictures and Videos
Recommended Communities
Community avatar for Fly Fishing Forum
Fly Fishing Forum
332K+ members
Community avatar for Elantra XD Forum
Elantra XD Forum
34K+ members
Community avatar for Bronco EV Forum
Bronco EV Forum
NEW!
0+ members
Top