[katoom383]

I have installed HMF pipe w/ JD jet kit. I e-mailed JD and asked for starting point but still have trouble starting. I live in Ohio about 600 ft above sea level. JD called for 180 main, red needle 5th clip, 45 pilot jet, 1 and 1/8 turn out on fuel screw. I run some GNCC and really need to fire up right away.

Thanks.

 

[ktmoregon]

does it start at all or cant get it to turn over what so ever.

 

[katoom383]

does it start at all or cant get it to turn over what so ever.

It starts but it doesn't fire up right away, didn't know if it is too rich or too lean. It turns over a couple of times before it fires.

 

[bferg911]

I have installed HMF pipe w/ JD jet kit. I e-mailed JD and asked for starting point but still have trouble starting. I live in Ohio about 600 ft above sea level. JD called for 180 main, red needle 5th clip, 45 pilot jet, 1 and 1/8 turn out on fuel screw. I run some GNCC and really need to fire up right away.

Thanks.

I am at 400 and run the same setup. 1 1/2 turns out and when warmed up it fires immediately. pretty close to immediate with choke and cold.

 

[katoom383]

I am at 400 and run the same setup. 1 1/2 turns out and when warmed up it fires immediately. pretty close to immediate with choke and cold.

Do you have blue needle in for colder temps, it's been cold here. About 32 degrees is avg.