Joined
·
5 Posts
Could you guys tell the sx models have Honda bolt pattern or are then Yamaha!
Thanks for your help guys!
Thanks for your help guys!
Hub?
Join the discussion
Recommended Reading
-
SX Suspension/Steering/Chassis/Wheels & TiresDoes anyone happen to have a set of these they are willing to sell? I'm looking for a set that go inside the tension nut on the caliper side on the axle. Probably a longshot, but they are back ordered for 2 months up in Canada and i cant find any anywhere :(
- 0
- 241
-
StoRo92 · updated
-
SX Suspension/Steering/Chassis/Wheels & TiresWell I went in to the local dealership yesterday to order shock rebuild kits for the factory WP shocks. The front kits are still available as I think they are used on the rear shocks of the 65cc dirt bikes. However, the rear kit is no longer available. Just a FYI.
- 1
- 591
-
quad97 · updated
-
SX Suspension/Steering/Chassis/Wheels & TiresI have what I believe to be a 2009 unsure on what cc or model because I’ve bought it as a project and in the process of getting it running right with a banshee 350 motor! I really wanna road legal this bike but in struggling to find the vin, I’ve sanded back between the upper and lower a arm...
- 1
- 542
-
SX Suspension/Steering/Chassis/Wheels & TiresWell got a helpful tip from someone on a good replacement bearing. So I went and picked them up. Much beefier than stock and slid right in. Best part about them is they can be picked up at your local napa. Bearings are about $30 a piece and seals were like $35 for both. I got mine back together...
- 25
- 10K
-
SX Suspension/Steering/Chassis/Wheels & TiresEvening. My quads frame has been powder coated by the previous owner. The engine number is all there. I there a way i can do a check on my engine number to recover the VIN on the frame... TIA Sent from my iPhone using Tapatalk
- 1
- 628
-
Tinus · updated
