KTM ATV HQ Forums banner
1 - 1 of 1 Posts

· Registered
592 Posts
Discussion Starter · #1 ·
Has anyone let some of the preload out of their front shocks? The manual says the stock setting on the 7th clip is the lowest permissible amount of preload. I was wanting to lower my ride height a little and thought I could loosen the preload up some, but I wanted to know if anyone has done this and if it caused any problems. Thanks in advance!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.