Handle bars
Join the discussion
Recommended Reading
-
SX Suspension/Steering/Chassis/Wheels & TiresWell I went in to the local dealership yesterday to order shock rebuild kits for the factory WP shocks. The front kits are still available as I think they are used on the rear shocks of the 65cc dirt bikes. However, the rear kit is no longer available. Just a FYI.
- 1
- 457
-
quad97 · updated
-
SX Suspension/Steering/Chassis/Wheels & TiresI have what I believe to be a 2009 unsure on what cc or model because I’ve bought it as a project and in the process of getting it running right with a banshee 350 motor! I really wanna road legal this bike but in struggling to find the vin, I’ve sanded back between the upper and lower a arm...
- 1
- 445
-
SX Suspension/Steering/Chassis/Wheels & TiresWell got a helpful tip from someone on a good replacement bearing. So I went and picked them up. Much beefier than stock and slid right in. Best part about them is they can be picked up at your local napa. Bearings are about $30 a piece and seals were like $35 for both. I got mine back together...
- 25
- 9K
-
SX Suspension/Steering/Chassis/Wheels & TiresEvening. My quads frame has been powder coated by the previous owner. The engine number is all there. I there a way i can do a check on my engine number to recover the VIN on the frame... TIA Sent from my iPhone using Tapatalk
- 1
- 465
-
Tinus · updated
-
SX Suspension/Steering/Chassis/Wheels & TiresEvening. New to pep shocks. Any baseline for a 230lb rider fully kitted???? Mostly xc racing and some mx days for fun. TIA Sent from my iPhone using Tapatalk
- 0
- 515
-
Tinus · updated
Join now to ask and comment!