KTM ATV HQ Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
650 Posts
Discussion Starter #1
what jetting spec should i use on a 09 450 xc with the slip on fmf pipe , snorkel remove. i plan on using jd jetting. i'm at sea level , max altitude i'm going to be riding is under 1000fts
 

·
Registered
Joined
·
1,445 Posts
what jetting spec should i use on a 09 450 xc with the slip on fmf pipe , snorkel remove. i plan on using jd jetting. i'm at sea level , max altitude i'm going to be riding is under 1000fts
Id probably start by going down one notch on the needle and start with a 180mj. Thats where id start. Good luck
 

·
Registered
Joined
·
579 Posts
what jetting spec should i use on a 09 450 xc with the slip on fmf pipe , snorkel remove. i plan on using jd jetting. i'm at sea level , max altitude i'm going to be riding is under 1000fts
JD jetting comes with a very good set of directions. Only thing you need to do different is go one size smaller on the main jet than he recommends.
 

·
Registered
Joined
·
650 Posts
Discussion Starter #4
thanks for the info . Is there a jd jetting dealer in canada?
 

·
Registered
Joined
·
650 Posts
Discussion Starter #6
i did order directly from him , this way im sure to have the right kit hehe
 
1 - 6 of 6 Posts
Top