KTM ATV HQ Forums banner

ANOTHER FAILURE

2402 Views 5 Replies 4 Participants Last post by  SandJunkie
my buddy had a race today, and his front end got super stiff, and then after three laps in a xc race, his lower ball joint came apart. he didn't hit anything, he was just rining along in a rather smooth section for a xc race, then all of a sudden...pop the race was over. just a heads up.
1 - 6 of 6 Posts
Anybody get a picture of it?

I'd like to see what it looked like
the ball came out of the pocket looked at other side very loose to replaced all 4
the ball came out of the pocket looked at other side very loose to replaced all 4
Was it a warranty issue? Or will we be having to buy these and have them in the tool box?
i had to replace all four of mine, i'm sure ktm would take care of it, i talked to the customer service about the issue, and they said i had to take it to the dealer and we would go from there. so i just replace them myself. by the way they are available from houser racing, and the uppers ars yamaha press in, and the lowers are honda press in, they are made by the same company.
i had to replace all four of mine, i'm sure ktm would take care of it, i talked to the customer service about the issue, and they said i had to take it to the dealer and we would go from there. so i just replace them myself. by the way they are available from houser racing, and the uppers ars yamaha press in, and the lowers are honda press in, they are made by the same company.
Good to know...thanks for the replies...

In case you haven't noticed I am trying to get fixes to all the problems so other have a data base...

Might have to start a "sticky" thread with the fixes posted in them...
See less See more
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top