KTM ATV HQ Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 15 Results
  1. For Sale/Trade
    2008 KTM 450 XC – 50HOURS ON REBUILD...Arizona title 525 Piston and cylinder Pro Circuit Full Exhaust New plastics Teixeira Tech GroundClearance A-arms KTM Big Bar Nerfs PRM Skid Plate KTM Bumper IMS large gas tank Durablue X-33 axle Original wheels (20...
  2. For Sale/Trade
    I am selling my 2009 KTM 450XC. Comes with a few spare/extra parts. I do have the title for it as well. $3800 OBO, located in MD
  3. For Sale/Trade
    I am selling a 2008 KTM 450XC. This quad looks and runs like a champ. Starts instantly at the push of the button. It has no issues at all and is ready for its next owner. Bike has some ProTaper bars installed. Comes with clean title. In addition, the bike comes with a set of rear paddles, nerf...
  4. For Sale/Trade
    Got what i needed. Plz remove thread.
  5. Wanted
    Got what i needed. Plz remove thread.
  6. XC Suspension/Steering/Chassis/Wheels & Tires
    Rolled my bike over the weekend and broke off the clutch lever at the clutch perch. OEM only shows the whole perch and clutch assembly. Does anyone know where i can buy only a perch? Here is the assembly part number off oem Part# 83002030000 450 xc ktm 2008 atv
  7. For Sale/Trade
    Here is what I have available.. Willing to negotiate prices and/or trade parts for a set of upper a-arms. NEED THESE GONE ASAP - 450 Cylinder w/piston. The cylinder is in excellent condition, but water leaked into the piston box and rusted the rings. $350 - Rear Plastics (Orange). In good...
  8. XC Engine/Carb/Drivetrain
    Hello, I have a 2009 450xc. I eventually want to upgrade the intake on it. I was wondering which intake is best for the money, the FCI or the SX intake with the 2010 hardening rubber piece. I don't want to spend $300 for an intake when I could get the same results with one that's roughly $200...
  9. Wanted
    If anyone has any front spindles for the 450/525xc please give me shoot me a email at [email protected] or call me 760-427-1598 Scott Plunkett
  10. XC Dyno/Tuning
    Hi, i have recently bought a HMF full system for a 450xc stock. The user guide says to change the Stock pilot jet for a 45pilot jet, ive done this and it is better than with the hmf and stock jet, but It has lost that bottom torque at the low to mid rpms. I would like some advice on tuning the...
  11. XC Engine/Carb/Drivetrain
    Just bought a 08 and wanted to know how we'll this bike will do going to race gncc and ixcr this summer I own a mechanic shop but do not do ktm and I have raced a trx250r all my life what should I do right off the bat the bike only has 10 hr or less also pulled oil sample the sample came back...
  12. Wanted
    My rear plastic has a small crack and it's getting worse. I'm looking for one in good shape that still has the factory graphics on the sides. Anybody has one let me know. Thanks
  13. For Sale/Trade
    2008 KTM 450XC (Located in Evansvile, IN) Asking $5500 Very Low Hours! Ready to Race! KTM/FMF SlipOn Sredrum 42mm Carb Fastranchero Carb Mods FCI Intake ktmbill Skid KTM HardParts MX Handguards Scotts Performance SS Oil filter ATV Stand Full Cover Full Set of spare plastics
  14. XC Engine/Carb/Drivetrain
    Hi folks, I need help. I bought a second hand 2009 450xc and although on the outside it looks in good condition, I think it's engine has had a much harder life. Problems started with the engine not revving out and turned out it was some dodgy wiring when the dealer replaced the twist throttle...
1-14 of 15 Results