What part number is HRC Needle?
Results 1 to 10 of 10
  1. #1
    Senior Member KTMATVHQ Guru

    Join Date
    Feb 2009
    Posts
    1,210
    I had Walt do my carb, and I know he (like everyone else) installed Honda HRC needle in it. I am trying to get a needle for my buddy to try, and I don't want to rip mine all apart just to figure out exactly what needle is in it.
    Can anyone tell me the part number, and needle code?

    Thanks, there are soo many different needles out there, and i want to be sure he has the right one.
    2009 OUTLAW 525 IRS. 41mm carb, HMF Competition Series Pipe, Custom Full Intake,Polaris Bob Oil Cooler Adaptor with Custom Cooler, Rath +3 A-arms, ALBA Anit-Vibe kit, 15 Tooth sprocket, Pure Polaris Nerfs, Pure Polaris Handguards, Pure Polaris Front Bumper,Fox Podium X Shocks (4), PRM 6 pack rack, PRM Rear A-Arm Guards, Pit Posse Shifter, Daytona Digital Tach, G-Force Wheel Spacers, IRazr Radials, Thumper Racing crankcase vent.

  2. #2
    Senior Member KTMATVHQ Member
    Join Date
    Dec 2008
    Posts
    309
    16020-nlz-610 is the art number from honda and you can get just the needle
    i have a needle that im using that works just as good and you can get from sudco for 10.00
    ill get you the number off it today

  3. #3
    Junior Member Rookie
    Join Date
    Jul 2013
    Posts
    11
    Hey homdaddy, I'm looking for the needle as well. Do you know the Sudco part for the needle?

  4. Remove Advertisements
    KTMATVHQ.com
    Advertisements
     

  5. #4
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    4,264
    NGPR is the needle code, good luck trying to buy it outside of Honda............
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / Manual cam chain tensioner Next round of mods: oil cooler........ the NEW TOP DOG 114 hrs…. best race engine I've owned

    KTM 554 XC
    : sx style crank, light weight SXF flywheel, TT sxf stator, steel linered cylinder, custom JE piston ceramic coating, plus 1 ported head / 807 cam, 43.5mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, PEP PB1s front LT and rear , Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics / gell cell battery Next round of mods: oil cooler........

    gotta stop spending $$$ on these KTM's...…..

    Polaris Outlaw 525 IRS - 2011
    , lonestar plus 2 A Arms, cut MXR front shocks (minus 1 ") with ZPS / ttripple rate, FUJ rear suspension rear shock mount units drops ride height 2", FUJ HD adj sway bar, 1.5” rear billet wheel spacers, Polaris nerfs, bumper and rear rack, Yoshi competition slip on, Pro Taper bars, acerbis hand guards, Trailtech GPS with billet protector. KTM throttle / Honda Front master cylinder and shorty lever / 41mm carb & hi flow intake runner / big filter / Billet FCR transition ring. Modified rear spring package / rear revalve.

    next round of mods: 8/33 cam, Hi Flow water pump and 540 cylinder / wossner piston waiting to go in, fastway 3 steering damper ala KTM setup, custom header using KTM XC header as a starting piece, light flywheel setup.
    gotta have something to modify this year !

    LTR 450
    , My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / special order Yoshi motard cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head and carillo rod...... the clark kent of the ATV trio ! 210 hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ # 1 Vets champ 2013
    NZ Vets (40+) North Island MX champ 08, 09, 12 & 13
    NZ TT champ Vets (40+) 06, 08, 09,12 & 13
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09, 11, 12 & 13
    hope to get a good season in for the remainder of 2014.......finding time to ride being the biggest problem !

  6. #5
    Senior Member KTMATVHQ Member
    Join Date
    Feb 2009
    Posts
    329
    Sudco does not have a replacement needle for the hrc. it is a Honda only part.

  7. #6
    Senior Member Member
    Join Date
    Mar 2013
    Location
    Mebane, NC
    Posts
    155
    Is there any benefit by just installing the hrc needle?

  8. #7
    Senior Member KTMATVHQ Member
    Join Date
    Apr 2010
    Posts
    278
    and how does that compare to ktn's OBDTP needle?
    450 xc Desert Off-Road Racer. KTM 525 kit, Carrillo rod, Teixeira Max Clearance A-Arms, Precision Pro Steering dampner, PRM full skid, Hiper beadlocks, Maxis Razr 2, Hiflow water pump, Pro-taper, Motion Pro Twist throttle.

  9. #8
    Super Moderator KTMATVHQ Addict
    Join Date
    Apr 2013
    Location
    New Mexico
    Posts
    519
    The taper is different. Using the Honda needle will cause it to run richer, will probly have to reduce jet size some.

  10. #9
    Senior Member Member
    Join Date
    Mar 2013
    Location
    Mebane, NC
    Posts
    155
    ok, so im better off just having carb bored?

  11. #10
    Super Moderator KTMATVHQ Addict
    Join Date
    Apr 2013
    Location
    New Mexico
    Posts
    519
    Both are good upgrades. Carb bore will definitely be a bigger jump in power but it will be even better with the honda needle. 2 completely different mods.


 

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

carburator needle part number
,
contact hrc.com.mx loc:us
,

hrc needle

,
hrc needle number
,
hrc needle part #
,

hrc needle part number

,
hrc needle part number for 07
,
hrc needles
,
ktm atv hq hrc needle?
,
what is an hrc needle
Click on a term to search for related topics.