Major Forum Upgrade Happening
Results 1 to 13 of 13
Like Tree4Likes
  • 1 Post By polaris bob
  • 1 Post By kiwi-craig
  • 2 Post By kiwi-craig

Thread: Major Forum Upgrade Happening

  1. #1
    Junior Member Rookie
    Join Date
    Dec 2010
    Posts
    4

    Thumbs down

    Hey guys, just wanted to give you a heads up that we are about to do a major forum upgrade.

    We will be shutting down the forum within the next 10 minutes to start on the upgrades, during which time the forum will be deactivated until the upgrade is completed. We expect to have the forum back up by 5PM CST.

    We know this is going to be a big change for the community for the better, and look forward to hearing everyone's opinions and suggestions!

  2. #2
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    4,264
    nice, kinda like a familar girlfriend with a hot new short skirt !
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / Manual cam chain tensioner Next round of mods: oil cooler........ the NEW TOP DOG 114 hrs…. best race engine I've owned

    KTM 554 XC
    : sx style crank, light weight SXF flywheel, TT sxf stator, steel linered cylinder, custom JE piston ceramic coating, plus 1 ported head / 807 cam, 43.5mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, PEP PB1s front LT and rear , Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics / gell cell battery Next round of mods: oil cooler........

    gotta stop spending $$$ on these KTM's...…..

    Polaris Outlaw 525 IRS - 2011
    , lonestar plus 2 A Arms, cut MXR front shocks (minus 1 ") with ZPS / ttripple rate, FUJ rear suspension rear shock mount units drops ride height 2", FUJ HD adj sway bar, 1.5” rear billet wheel spacers, Polaris nerfs, bumper and rear rack, Yoshi competition slip on, Pro Taper bars, acerbis hand guards, Trailtech GPS with billet protector. KTM throttle / Honda Front master cylinder and shorty lever / 41mm carb & hi flow intake runner / big filter / Billet FCR transition ring. Modified rear spring package / rear revalve.

    next round of mods: 8/33 cam, Hi Flow water pump and 540 cylinder / wossner piston waiting to go in, fastway 3 steering damper ala KTM setup, custom header using KTM XC header as a starting piece, light flywheel setup.
    gotta have something to modify this year !

    LTR 450
    , My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / special order Yoshi motard cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head and carillo rod...... the clark kent of the ATV trio ! 210 hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ # 1 Vets champ 2013
    NZ Vets (40+) North Island MX champ 08, 09, 12 & 13
    NZ TT champ Vets (40+) 06, 08, 09,12 & 13
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09, 11, 12 & 13
    hope to get a good season in for the remainder of 2014.......finding time to ride being the biggest problem !

  3. #3
    Senior Member Member

    Join Date
    Jul 2009
    Location
    Germany
    Posts
    219
    Quote Originally Posted by kiwi-craig View Post
    nice, kinda like a familar girlfriend with a hot new short skirt !
    More like a brand new girlfriend :-)

  4. Remove Advertisements
    KTMATVHQ.com
    Advertisements
     

  5. #4
    Senior Member KTMATVHQ Guru

    Join Date
    Feb 2009
    Posts
    1,210
    Hotter Girlfriend with DD's too!
    2009 OUTLAW 525 IRS. 41mm carb, HMF Competition Series Pipe, Custom Full Intake,Polaris Bob Oil Cooler Adaptor with Custom Cooler, Rath +3 A-arms, ALBA Anit-Vibe kit, 15 Tooth sprocket, Pure Polaris Nerfs, Pure Polaris Handguards, Pure Polaris Front Bumper,Fox Podium X Shocks (4), PRM 6 pack rack, PRM Rear A-Arm Guards, Pit Posse Shifter, Daytona Digital Tach, G-Force Wheel Spacers, IRazr Radials, Thumper Racing crankcase vent.

  6. #5
    Senior Member KTMATVHQ Addict

    Join Date
    Apr 2008
    Location
    SE Michigan
    Posts
    822
    Holy site spamming Bat Man. This guy is everywhere. Can something be done to stop these spammers????
    basketballl00011 likes this.
    2003 Polaris Predator / 2004 KTM 525 exc 6 speed motor.

    570 Thumper Racing kit w/ 12.5 - 1 CP piston.
    Head ported by Thumper Racing w/ new intake seats done by Pro-1 racing.
    Stage 5 cam ( Custom design by Thumper Racing )
    AC bearing mod.
    Oil system mod by DJH.
    KW valves ( stock size )
    * #100 CDI dirt bike CDI.
    42 mm FCR carb by Walt/ Fast64ranchero. ( SX carb = No TPS )
    Trail Tech -10 oz flywheel. ( Stock is 30 oz/ trail tech = 21 ozs )
    Mino water pump. Full flow set up, no T-stat.
    PB Oil cooler.
    Custom modded intake. Uni filter/ D2 moto adapter on a modded Predator intake tube.
    KTM Bill modded, CT racing full exhaust system.
    Tusk Clutch kit.
    Honda thumb throttle.

  7. #6
    Senior Member Member
    Join Date
    Oct 2009
    Location
    Page, AZ.
    Posts
    147
    These spammers are flooding everything!

  8. #7
    Senior Member Member
    Join Date
    Jan 2011
    Location
    Fond du Lac, Wisconsin
    Posts
    191
    I woke up and logged on and seen there were 133 new posts. I thought we started getting much more traffic on here. I was wrong . The spam isn't even good either, I cant even read it.
    -- 08 KTM 450xc - Still brand new. Only 3 rides on the ice

    -- 03 Suzuki Z400 -- Sold

  9. #8
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    4,264
    drilling em as quick as we can............... fuckers....
    polaris bob likes this.
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / Manual cam chain tensioner Next round of mods: oil cooler........ the NEW TOP DOG 114 hrs…. best race engine I've owned

    KTM 554 XC
    : sx style crank, light weight SXF flywheel, TT sxf stator, steel linered cylinder, custom JE piston ceramic coating, plus 1 ported head / 807 cam, 43.5mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, PEP PB1s front LT and rear , Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics / gell cell battery Next round of mods: oil cooler........

    gotta stop spending $$$ on these KTM's...…..

    Polaris Outlaw 525 IRS - 2011
    , lonestar plus 2 A Arms, cut MXR front shocks (minus 1 ") with ZPS / ttripple rate, FUJ rear suspension rear shock mount units drops ride height 2", FUJ HD adj sway bar, 1.5” rear billet wheel spacers, Polaris nerfs, bumper and rear rack, Yoshi competition slip on, Pro Taper bars, acerbis hand guards, Trailtech GPS with billet protector. KTM throttle / Honda Front master cylinder and shorty lever / 41mm carb & hi flow intake runner / big filter / Billet FCR transition ring. Modified rear spring package / rear revalve.

    next round of mods: 8/33 cam, Hi Flow water pump and 540 cylinder / wossner piston waiting to go in, fastway 3 steering damper ala KTM setup, custom header using KTM XC header as a starting piece, light flywheel setup.
    gotta have something to modify this year !

    LTR 450
    , My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / special order Yoshi motard cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head and carillo rod...... the clark kent of the ATV trio ! 210 hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ # 1 Vets champ 2013
    NZ Vets (40+) North Island MX champ 08, 09, 12 & 13
    NZ TT champ Vets (40+) 06, 08, 09,12 & 13
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09, 11, 12 & 13
    hope to get a good season in for the remainder of 2014.......finding time to ride being the biggest problem !

  10. #9
    Senior Member KTMATVHQ Addict

    Join Date
    Apr 2008
    Location
    SE Michigan
    Posts
    822

    Thumbs up

    Quote Originally Posted by kiwi-craig View Post
    drilling em as quick as we can............... fuckers....
    I do not envy you that job. He seemed to be really determined to get his russian spam out there!!
    2003 Polaris Predator / 2004 KTM 525 exc 6 speed motor.

    570 Thumper Racing kit w/ 12.5 - 1 CP piston.
    Head ported by Thumper Racing w/ new intake seats done by Pro-1 racing.
    Stage 5 cam ( Custom design by Thumper Racing )
    AC bearing mod.
    Oil system mod by DJH.
    KW valves ( stock size )
    * #100 CDI dirt bike CDI.
    42 mm FCR carb by Walt/ Fast64ranchero. ( SX carb = No TPS )
    Trail Tech -10 oz flywheel. ( Stock is 30 oz/ trail tech = 21 ozs )
    Mino water pump. Full flow set up, no T-stat.
    PB Oil cooler.
    Custom modded intake. Uni filter/ D2 moto adapter on a modded Predator intake tube.
    KTM Bill modded, CT racing full exhaust system.
    Tusk Clutch kit.
    Honda thumb throttle.

  11. #10
    Senior Member Member
    Join Date
    Jan 2011
    Location
    Fond du Lac, Wisconsin
    Posts
    191
    Quote Originally Posted by polaris bob View Post
    I do not envy you that job. He seemed to be really determined to get his russian spam out there!!
    haha. That he did. I was tempted to buy whatever he was spamming, just because of his determination. Gotta give him props for that.
    -- 08 KTM 450xc - Still brand new. Only 3 rides on the ice

    -- 03 Suzuki Z400 -- Sold

  12. #11
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    4,264
    the one click "kill em" , erase em, ban em for life and shove there balls up there arse button is working a treat....... be nice to me !!!
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / Manual cam chain tensioner Next round of mods: oil cooler........ the NEW TOP DOG 114 hrs…. best race engine I've owned

    KTM 554 XC
    : sx style crank, light weight SXF flywheel, TT sxf stator, steel linered cylinder, custom JE piston ceramic coating, plus 1 ported head / 807 cam, 43.5mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, PEP PB1s front LT and rear , Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics / gell cell battery Next round of mods: oil cooler........

    gotta stop spending $$$ on these KTM's...…..

    Polaris Outlaw 525 IRS - 2011
    , lonestar plus 2 A Arms, cut MXR front shocks (minus 1 ") with ZPS / ttripple rate, FUJ rear suspension rear shock mount units drops ride height 2", FUJ HD adj sway bar, 1.5” rear billet wheel spacers, Polaris nerfs, bumper and rear rack, Yoshi competition slip on, Pro Taper bars, acerbis hand guards, Trailtech GPS with billet protector. KTM throttle / Honda Front master cylinder and shorty lever / 41mm carb & hi flow intake runner / big filter / Billet FCR transition ring. Modified rear spring package / rear revalve.

    next round of mods: 8/33 cam, Hi Flow water pump and 540 cylinder / wossner piston waiting to go in, fastway 3 steering damper ala KTM setup, custom header using KTM XC header as a starting piece, light flywheel setup.
    gotta have something to modify this year !

    LTR 450
    , My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / special order Yoshi motard cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head and carillo rod...... the clark kent of the ATV trio ! 210 hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ # 1 Vets champ 2013
    NZ Vets (40+) North Island MX champ 08, 09, 12 & 13
    NZ TT champ Vets (40+) 06, 08, 09,12 & 13
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09, 11, 12 & 13
    hope to get a good season in for the remainder of 2014.......finding time to ride being the biggest problem !

  13. #12
    Senior Member Member
    Join Date
    Feb 2011
    Location
    oregon
    Posts
    137
    do i have something screwed up? at the forum mainpage, the forum index is about 1/4 of the way across my screen, with the rest filled in with the poll list, budyy list, etc ect. even the titles and headers for the forum topics are crammed togethor. when i go to a specific thread, then it opens up to fill the whole screen.

  14. #13
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    4,264
    try restarting your pc ? I had the same this morning, fine now ?
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / Manual cam chain tensioner Next round of mods: oil cooler........ the NEW TOP DOG 114 hrs…. best race engine I've owned

    KTM 554 XC
    : sx style crank, light weight SXF flywheel, TT sxf stator, steel linered cylinder, custom JE piston ceramic coating, plus 1 ported head / 807 cam, 43.5mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, PEP PB1s front LT and rear , Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics / gell cell battery Next round of mods: oil cooler........

    gotta stop spending $$$ on these KTM's...…..

    Polaris Outlaw 525 IRS - 2011
    , lonestar plus 2 A Arms, cut MXR front shocks (minus 1 ") with ZPS / ttripple rate, FUJ rear suspension rear shock mount units drops ride height 2", FUJ HD adj sway bar, 1.5” rear billet wheel spacers, Polaris nerfs, bumper and rear rack, Yoshi competition slip on, Pro Taper bars, acerbis hand guards, Trailtech GPS with billet protector. KTM throttle / Honda Front master cylinder and shorty lever / 41mm carb & hi flow intake runner / big filter / Billet FCR transition ring. Modified rear spring package / rear revalve.

    next round of mods: 8/33 cam, Hi Flow water pump and 540 cylinder / wossner piston waiting to go in, fastway 3 steering damper ala KTM setup, custom header using KTM XC header as a starting piece, light flywheel setup.
    gotta have something to modify this year !

    LTR 450
    , My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / special order Yoshi motard cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head and carillo rod...... the clark kent of the ATV trio ! 210 hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ # 1 Vets champ 2013
    NZ Vets (40+) North Island MX champ 08, 09, 12 & 13
    NZ TT champ Vets (40+) 06, 08, 09,12 & 13
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09, 11, 12 & 13
    hope to get a good season in for the remainder of 2014.......finding time to ride being the biggest problem !


 

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

djh oil mod

,

forum upgrade

Click on a term to search for related topics.