+ Reply to Thread
Results 1 to 7 of 7
  1. 02-08-2012 02:38 AM #1
    firsov885 [OP]
    firsov885 is offline
    Junior Member Rookie
    firsov885's Avatar
    Join Date
    Feb 2012
    Posts
    4

    teixeira a arms +2 for trade or sale...

    i just bought an 08 ktm 450 xc that came with a set of teixeira tech mx arms and is 49 inches wide and im wanting to put it back to stock width so i have a set of teixeira tech +2 a arms that im willing to sale for 500 or trade stock a arms and 200 dollarsi live in cincinnati so if its less then 4 hours i can meet somwhere
    Reply With Quote Reply With Quote
  2. 02-08-2012 03:48 AM #2
    kiwi-craig
    kiwi-craig is offline
    Administrator KTMATVHQ Guru
    kiwi-craig's Avatar
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,770
    send me some pics / pm please
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........
    Reply With Quote Reply With Quote
  3. 02-08-2012 04:57 PM #3
    rts551
    rts551 is online now
    Member Rookie
    rts551's Avatar
    Join Date
    Apr 2010
    Posts
    42
    I would like some pics as well. pls
    Reply With Quote Reply With Quote
  4. 02-09-2012 04:02 PM #4
    clyde
    clyde is offline
    Member Rookie
    clyde's Avatar
    Join Date
    Nov 2011
    Location
    haiti
    Posts
    32
    Send a message via MSN to clyde
    send me a pics tnx
    Reply With Quote Reply With Quote
  5. 02-09-2012 10:33 PM #5
    rumlesj1
    rumlesj1 is offline
    Senior Member KTMATVHQ Addict
    rumlesj1's Avatar
    Join Date
    Jun 2010
    Posts
    674
    sent u a pm, pics please.
    2009 KTM 525XC #841

    Brad Mulvey Mod SX arms, SX axle, SX brake lines, KTM Big Nerfs, KTM Hood, Motoworks SR4 slip on, akro manifold, ESR heat gauge, 42mm bored carb, hrc kit, YFZ float bowl w/ adjustable leak jet, FCI "like" Intake w/ RC-5000 K&N filter.
    Reply With Quote Reply With Quote
  6. 04-10-2012 02:39 AM #6
    rts551
    rts551 is online now
    Member Rookie
    rts551's Avatar
    Join Date
    Apr 2010
    Posts
    42
    Pics please and do you still have them?
    Reply With Quote Reply With Quote
  7. 04-10-2012 05:38 AM #7
    gfritts
    gfritts is offline
    Junior Member Rookie
    gfritts's Avatar
    Join Date
    Mar 2011
    Posts
    9
    Just what I'm looking for. I have some stock xc a arms with about 20 hours on them, good shape no tears and no play in ball joints. I will also throw in a second pair but the ball joints are a little warn. I have the tie rods to match if you need those also. As long as your teixera arms are in good shape I will throw in the $200 plus all the above.Let me know I live in northern ca. if interested.
    Thanks, Gary 530 306 6385
    Reply With Quote Reply With Quote

 
« Previous Thread | Next Thread »

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Search tags for this page

ktm atv mx a-arms

,

ktm web cam sale

,

teixeira tech ktm a arms

,

texiaera aarms setup

Click on a term to search for related topics.
All times are GMT. The time now is 01:35 AM. Powered by vBulletin® Version 4.1.4
Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO ©2011, Crawlability, Inc.