HD replacment Ball Joints

[kiwi-craig]

Thanks to the various guys on this site for sorting / finding


Houser has both upper and lower replacements for stock A-arms

Houser Part numbers

Lower 132123 [attachment=4509:132123hr.jpg]

Upper 132110 [attachment=4510:132110hr.jpg]

$27 each and they include the rubber boots

[5.0fox]

Your welcome! I never disassembled the balljoint to check for differences but it is noticeably heavier then the oem ktm part.

[DmaxMike]

do they fit? i just orded a new new set from magic becasue the "HD" set i got from cali did not even come close to fitting in my a-arms?

[5.0fox]

Ya the ones fr-om houser fit perfect!

[mlross222]

Ya the ones fr-om houser fit perfect!

these for the top and bottom as well?

[legros]

on the houser webpage give #123112 what is the correct parts #

http://www.houser-racing.com/CategoryProdu...el+A-Arm:%2B0.5

[kiwi-craig]

thats the ball joint they use inthe houser a arms, aftermarket trx bottom, yfz on the top, these do not fit the stock arms.

on the houser webpage give #123112 what is the correct parts #

http://www.houser-racing.com/CategoryProdu...el+A-Arm:%2B0.5

[kiwi-craig]

punch in the part number 132123 into the search field on the the top left of the houser page:

http://www.houser-racing.com/ProductDetail...0897-1201272987

[legros]

thank you
do you know a replacement for the stock tie rod end dont want to pay the full ktm price

[cornova770]

The ball joints are for the stock lower a arms, but what about new ball joints for the top a arms, does anyone have any info where to get new ones for the top as well? Thanks

[who_gives_a6]

The ball joints are for the stock lower a arms, but what about new ball joints for the top a arms, does anyone have any info where to get new ones for the top as well? Thanks

I'm wondering the same. Need ball joints. I have Laeger arms but they use stock ball joints. So these Honda ones work for stock arms or just the Houser setup? Seems to be a mixed amount of comments here. What about the uppers as said?

[step869]

I'm wondering the same. Need ball joints. I have Laeger arms but they use stock ball joints. So these Honda ones work for stock arms or just the Houser setup? Seems to be a mixed amount of comments here. What about the uppers as said?

i also need a set for the stock a arms on my 08 450xc
wheres the best bet to buy from and do they come with boots?????

thanks,
john

[AZ450XC]

i also need a set for the stock a arms on my 08 450xc
wheres the best bet to buy from and do they come with boots?????

thanks,
john

Houser has both upper and lower HD replacements for stock A-arms

Part numbers 132123 & 132110

$27 each and they include the rubber boots

[KTM RIDAA]

thanks az 450 i need the whole set

[step869]

Houser has both upper and lower HD replacements for stock A-arms

Part numbers 132123 & 132110

each and they include the rubber boots

hey just the info i needed

thank you boss,
john

[zbra09]

What makes these HD? On their website it says nothing about being HD...

[kiwi-craig]

guys who have bought these comment that they are noticably heavier weight wise.......... does this constitue HD, you decide........

[zbra09]

Yeah i actually just got them in the mail ill post pics in a bit

[step869]

mine just came in what are you guys useing to put these in mine are not going in far enough to put snap ring on

thanks in advance,
john

[step869]

any help??????????????