Replacing Tie rod and ends on 09 525 xc with Aftermarket
Results 1 to 3 of 3
Like Tree1Likes
  • 1 Post By throttlejocky316

Thread: Replacing Tie rod and ends on 09 525 xc with Aftermarket

  1. #1
    Junior Member Rookie
    Join Date
    Apr 2017
    Posts
    28

    Replacing Tie rod and ends on 09 525 xc with Aftermarket

    So I am in need of the complete tie rod and ends, not because I wrecked but because 2 of the 4 end's boots are busted.

    I am looking at these ( disregard the quad selection), So I called them and they think they fit our quad, but will call me back to confirm. Doe anyone know if these work, or if their is a set for around $150.

    New OEM on Rocky is about $110 per side, I have Houser Slicast A arms , stock travel.

    Thanks

    ASR PRO X-SERIES RACING TIE RODS are manufactured out of
    Precision Formed, Seamless, Heat Treated .120 Wall 5/8 inch
    Aircraft Grade Tubing with Stainless Steel Threaded Ends. The
    stock style tie rods and rod ends. With most OEM tie rod ends
    being about 45.00 each (x4) you can see why these are the best
    Rod Set! Available in Stock, +1, +2 and +3 lengths. Lifetime
    structural warranty too!

    KFX700 A-Arms, Steering Stems, Tie Rods, Brake Lines, Bearings & More

  2. #2
    Junior Member Rookie
    Join Date
    Apr 2017
    Posts
    28
    Didn't fit, went with oem

    Sent from my SAMSUNG-SM-G900A using Tapatalk

  3. #3
    Senior Member Member
    Join Date
    Mar 2011
    Location
    Lompoc, CA
    Posts
    197
    I had a problem with my boots splitting. I replaced all my ball joints with OEM. I then drilled and tapped a hole to put a grease zirk in the back of the joint, I haven't had a boot break since.
    rc51ner likes this.
    08 525xc ≡ 12.5:1 570 bbk, +1 valves, Crower Cam, Houser Bounce Nerfs, Razr 2 rears, Razr fronts, Pro Armor Dominator Bumper, Scotts Steering Damper, Mino Water Pump, FCI intake, KTMBill Skid Plate, FastRanchero 41mm Carb


 

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Tags for this Thread