+ Reply to Thread
Results 1 to 9 of 9
  1. #1
    Member Rookie

    Join Date
    Dec 2010
    Posts
    41

    intake boot part number?

    My intake boot ripped today, motosport lists this part number in the fiche for a replacement. Is this the correct part? It is a different part number than what is in the sticky section of the forum. I believe it ends in 4200. Could anyone help me out I need to get one coming fast.
    [h=3][/h]

  2. #2
    Senior Member KTMATVHQ Addict

    Join Date
    Aug 2009
    Location
    Hatfield,Pa
    Posts
    544
    I belive the correct part number is 59436044200. It is the upgraded sx boot.
    '08 525 XC
    Fast64Ranchero's Carb Mods
    FCI Intake
    KTM Bill's Ceramic coated Full Exhaust
    RocketRon's Tripple Rate Fronts and Dual Rate Rear
    KTM Bill's Axel Nut
    Jagg 6 row oil cooler/PB adapter/Jagg by-pass valve
    7602 Racing's T6 carb filter
    15 Tooth Front Sprocket
    Custom Dash Relocation
    PRM .190 Aluminum engine skidplate
    KTM Nerfs w/heel guards

  3. #3
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    4,182
    you need the 200 end suffix, 000 is the orginal crap part.........
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / Manual cam chain tensioner Next round of mods: oil cooler........ the NEW TOP DOG 114 hrs…. best race engine I've owned

    KTM 554 XC
    : sx style crank, light weight SXF flywheel, TT sxf stator, steel linered cylinder, custom JE piston ceramic coating, plus 1 ported head / 807 cam, 43.5mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, PEP PB1s front LT and rear , Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics / gell cell battery Next round of mods: oil cooler........

    gotta stop spending $$$ on these KTM's...…..

    Polaris Outlaw 525 IRS - 2011
    , lonestar plus 2 A Arms, cut MXR front shocks (minus 1 ") with ZPS / ttripple rate, FUJ rear suspension rear shock mount units drops ride height 2", FUJ HD adj sway bar, 1.5” rear billet wheel spacers, Polaris nerfs, bumper and rear rack, Yoshi competition slip on, Pro Taper bars, acerbis hand guards, Trailtech GPS with billet protector. KTM throttle / Honda Front master cylinder and shorty lever / 41mm carb & hi flow intake runner / big filter / Billet FCR transition ring. Modified rear spring package / rear revalve.

    next round of mods: 8/33 cam, Hi Flow water pump and 540 cylinder / wossner piston waiting to go in, fastway 3 steering damper ala KTM setup, custom header using KTM XC header as a starting piece, light flywheel setup.
    gotta have something to modify this year !

    LTR 450
    , My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / special order Yoshi motard cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head and carillo rod...... the clark kent of the ATV trio ! 210 hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ # 1 Vets champ 2013
    NZ Vets (40+) North Island MX champ 08, 09, 12 & 13
    NZ TT champ Vets (40+) 06, 08, 09,12 & 13
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09, 11, 12 & 13
    hope to get a good season in for the remainder of 2014.......finding time to ride being the biggest problem !

  4. #4
    Senior Member KTMATVHQ Addict

    Join Date
    Apr 2009
    Location
    NY
    Posts
    800
    Yea found mine ripped today too. Never had one rip before. I ran my bike with the fuel customs intake only 2 times and this is what I found. Intake is now up for sale. Practically brand new. Is 59436044200 the correct upgraded boot for the xc? I see above it says sx.
    intake boot part number?-securedownload-1.jpegintake boot part number?-securedownload.jpeg

  5. #5
    Senior Member KTMATVHQ Addict

    Join Date
    Aug 2009
    Location
    Hatfield,Pa
    Posts
    544
    I have been under the impression that 59436044200 was the correct replacement, and yes it is the sx boot. With that being said, I never had my original boot rip. I was just proactive and ordered one up. I also run the FCI, and I have ripped the sx boot (59436044200). Right now I'm using a piece of radiator hose, and I know it won't last, so I ordered another boot last night.
    '08 525 XC
    Fast64Ranchero's Carb Mods
    FCI Intake
    KTM Bill's Ceramic coated Full Exhaust
    RocketRon's Tripple Rate Fronts and Dual Rate Rear
    KTM Bill's Axel Nut
    Jagg 6 row oil cooler/PB adapter/Jagg by-pass valve
    7602 Racing's T6 carb filter
    15 Tooth Front Sprocket
    Custom Dash Relocation
    PRM .190 Aluminum engine skidplate
    KTM Nerfs w/heel guards

  6. #6
    Member Rookie

    Join Date
    Dec 2010
    Posts
    41
    Who stocks these, everywhere I check says 5-6 day ship time and I am planning on going to the gncc this weekend.

  7. #7
    Senior Member KTMATVHQ Guru
    Join Date
    Nov 2010
    Location
    iowa
    Posts
    1,582
    try action motorsports in texas call them and see or check there site. if not there is a dealer next to ktm north america in ohio i think it is. not sure of name. they could proabbly have it to you by Wednesday with 1 day shipping. and if all else fails do the radiator hose to get you by...
    -09 450sx- KTM slip-on, Bills a-arms, Rocket Ron WP's.

    -09 450sx- Bill's pipe, and a-arms, PEP Shocks, Baldwin head, Walt's dual squirt AP nozzle and 41.5mm bore.

    Both have Quadtech hoods, Ranchero carbs, Kiwi's spring mod, KTM Bill skidplates, High flow water pumps, KTM Bumpers, and Pro Armor Nerfs.

    2014 Sponsors- 38 Motorsports, Leatt Brace, Vertex Pistons, 100%, Lucas Oil, Jettrim, Streamline Brakes, Gaerne, KTMPartsHouse

  8. #8
    Member Rookie

    Join Date
    Dec 2010
    Posts
    41
    thanks, I do work for some rubber hose companies, gonna see if I can call in a favor on this one.

  9. #9
    Senior Member KTMATVHQ Member
    Join Date
    Jan 2011
    Location
    Sandusky, Ohio
    Posts
    422
    Have we verified if this is the same boot for the XC? 59436044200


 

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Search tags for this page

ktm 200 intake boot

,

ktm 450 xc atv intake boot

,

ktm 525 xc atv intake boot

,

ktm 525 xc carb intake boot

,
ktm 525 xc-w carb mods
,

ktm atv intake boot

,

ktm intake boot

,

ktm intake boot 525 xc atv

,
ktm xc carburator boot
,

ktm525xc intake boot

Click on a term to search for related topics.