+ Reply to Thread
Results 1 to 14 of 14
  1. 01-16-2012 10:48 PM #1
    rumlesj1 [OP]
    rumlesj1 is offline
    Senior Member KTMATVHQ Addict
    rumlesj1's Avatar
    Join Date
    Jun 2010
    Posts
    674

    35 tooth rear sproket

    anybody know where i can get a 35 tooth rear sprocket? or even a 34 would be ok i guess.
    2009 KTM 525XC #841

    Brad Mulvey Mod SX arms, SX axle, SX brake lines, KTM Big Nerfs, KTM Hood, Motoworks SR4 slip on, akro manifold, ESR heat gauge, 42mm bored carb, hrc kit, YFZ float bowl w/ adjustable leak jet, FCI "like" Intake w/ RC-5000 K&N filter.
    Reply With Quote Reply With Quote
  2. 01-17-2012 12:15 AM #2
    kiwi-craig
    kiwi-craig is offline
    Administrator KTMATVHQ Guru
    kiwi-craig's Avatar
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,770
    I'd like some 35's also !
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........
    Reply With Quote Reply With Quote
  3. 01-17-2012 02:38 AM #3
    sandshredder
    sandshredder is offline
    Senior Member Member
    sandshredder's Avatar
    Join Date
    Feb 2011
    Location
    oregon
    Posts
    123
    ive never seen smaller than a 37 listed for a ktm. you may need to go up in the front along with the 37. what ratio are you looking for?
    Reply With Quote Reply With Quote
  4. 01-17-2012 02:57 AM #4
    AZ450XC
    AZ450XC is offline
    Senior Member KTMATVHQ Guru
    AZ450XC's Avatar
    Join Date
    May 2009
    Location
    Arizona
    Posts
    1,209
    Renthal made a 36 but discontinued it awhile back. Without having one made by sidewinder or someone I'm not sure you can get that small for the KTM. You could switch to a dominator axle, I run one and it uses Honda sprockets. The 35 might also make the chain rub on the guide in the skid plate.
    Last edited by AZ450XC; 01-17-2012 at 03:04 AM.
    2012 Sponsors: DWT, Motoworks, Rath Racing, Fasst Company, BioTearOffs, Twin Air, BRM Offroad Graphics, GoPro, Arizona Motocity, Leatt Brace, FourWerx Carbon, Motorex USA.
    Reply With Quote Reply With Quote
  5. 01-17-2012 06:59 AM #5
    sticko2
    sticko2 is offline
    Senior Member KTMATVHQ Guru
    sticko2's Avatar
    Join Date
    Jun 2009
    Location
    SCOTLAND
    Posts
    1,241
    Send a message via MSN to sticko2
    talon make 36.
    505sx, 43.5 carb, hmf full system, Crower victory cam, DB CDI, Manual Tensioner, Hiflo waterpump, kiwi mod carb spring, ranchero mods for ap & adj leak jet, PEP PB1 all round on xc swinger (lower) & Walsh arms, Axcalibre Axle, Precision Pro damper, Flexxbars, honda throttle, custom relocated battery box, FourWerx hump seat, Quadtech hood525xc, 41 Carb, SX pipe, Hiflo waterpump, kiwi mod carb spring, ranchero mods for ap & leak jet, Rocket Ron Racing WP's on jb arms, Softbars.
    Reply With Quote Reply With Quote
  6. 01-17-2012 02:49 PM #6
    kiwi-craig
    kiwi-craig is offline
    Administrator KTMATVHQ Guru
    kiwi-craig's Avatar
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,770
    Talon, is that a UK brand ??? I want one.........
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........
    Reply With Quote Reply With Quote
  7. 01-17-2012 02:55 PM #7
    kiwi-craig
    kiwi-craig is offline
    Administrator KTMATVHQ Guru
    kiwi-craig's Avatar
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,770
    there was a guy in europe getting 35's custom cut........
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........
    Reply With Quote Reply With Quote
  8. 01-17-2012 09:44 PM #8
    rumlesj1 [OP]
    rumlesj1 is offline
    Senior Member KTMATVHQ Addict
    rumlesj1's Avatar
    Join Date
    Jun 2010
    Posts
    674
    ya i need the 35 cause im running a 15 front 37 rear right now but with 18" tires. im doing ice racing / oval racing and im sure i could gain a few KMS/ hour with a few less teeth in the rear. im hitting 110 right now on the back stretch but i think with some taller gears i should beable to get 115 with it.

    and right now im close to rev limit.
    2009 KTM 525XC #841

    Brad Mulvey Mod SX arms, SX axle, SX brake lines, KTM Big Nerfs, KTM Hood, Motoworks SR4 slip on, akro manifold, ESR heat gauge, 42mm bored carb, hrc kit, YFZ float bowl w/ adjustable leak jet, FCI "like" Intake w/ RC-5000 K&N filter.
    Reply With Quote Reply With Quote
  9. 01-17-2012 09:52 PM #9
    sticko2
    sticko2 is offline
    Senior Member KTMATVHQ Guru
    sticko2's Avatar
    Join Date
    Jun 2009
    Location
    SCOTLAND
    Posts
    1,241
    Send a message via MSN to sticko2
    Quote Originally Posted by kiwi-craig View Post
    Talon, is that a UK brand ??? I want one.........
    i could send you one with the piston if you want.
    505sx, 43.5 carb, hmf full system, Crower victory cam, DB CDI, Manual Tensioner, Hiflo waterpump, kiwi mod carb spring, ranchero mods for ap & adj leak jet, PEP PB1 all round on xc swinger (lower) & Walsh arms, Axcalibre Axle, Precision Pro damper, Flexxbars, honda throttle, custom relocated battery box, FourWerx hump seat, Quadtech hood525xc, 41 Carb, SX pipe, Hiflo waterpump, kiwi mod carb spring, ranchero mods for ap & leak jet, Rocket Ron Racing WP's on jb arms, Softbars.
    Reply With Quote Reply With Quote
  10. 01-17-2012 09:55 PM #10
    sticko2
    sticko2 is offline
    Senior Member KTMATVHQ Guru
    sticko2's Avatar
    Join Date
    Jun 2009
    Location
    SCOTLAND
    Posts
    1,241
    Send a message via MSN to sticko2
    Quote Originally Posted by sticko2 View Post
    i could send you one with the piston if you want.
    didnt someone get a 16 front to fit with some modifications?
    505sx, 43.5 carb, hmf full system, Crower victory cam, DB CDI, Manual Tensioner, Hiflo waterpump, kiwi mod carb spring, ranchero mods for ap & adj leak jet, PEP PB1 all round on xc swinger (lower) & Walsh arms, Axcalibre Axle, Precision Pro damper, Flexxbars, honda throttle, custom relocated battery box, FourWerx hump seat, Quadtech hood525xc, 41 Carb, SX pipe, Hiflo waterpump, kiwi mod carb spring, ranchero mods for ap & leak jet, Rocket Ron Racing WP's on jb arms, Softbars.
    Reply With Quote Reply With Quote
  11. 01-17-2012 10:41 PM #11
    AZ450XC
    AZ450XC is offline
    Senior Member KTMATVHQ Guru
    AZ450XC's Avatar
    Join Date
    May 2009
    Location
    Arizona
    Posts
    1,209
    Custom Made Sprockets by Sidewinder Sprockets
    2012 Sponsors: DWT, Motoworks, Rath Racing, Fasst Company, BioTearOffs, Twin Air, BRM Offroad Graphics, GoPro, Arizona Motocity, Leatt Brace, FourWerx Carbon, Motorex USA.
    Reply With Quote Reply With Quote
  12. 01-18-2012 11:32 AM #12
    rumlesj1 [OP]
    rumlesj1 is offline
    Senior Member KTMATVHQ Addict
    rumlesj1's Avatar
    Join Date
    Jun 2010
    Posts
    674
    yep just contacted them. they say they can make a 35 but it prolly wont fit over the hub so that means remove the axle to install which is no big deal for me. 36 is no problem though it will fit over the hub.
    2009 KTM 525XC #841

    Brad Mulvey Mod SX arms, SX axle, SX brake lines, KTM Big Nerfs, KTM Hood, Motoworks SR4 slip on, akro manifold, ESR heat gauge, 42mm bored carb, hrc kit, YFZ float bowl w/ adjustable leak jet, FCI "like" Intake w/ RC-5000 K&N filter.
    Reply With Quote Reply With Quote
  13. 01-18-2012 11:43 AM #13
    rumlesj1 [OP]
    rumlesj1 is offline
    Senior Member KTMATVHQ Addict
    rumlesj1's Avatar
    Join Date
    Jun 2010
    Posts
    674
    well just placed the order for the 35 tooth, they say there is no gaurantee on it though.. so i will let u guys know if it will fit and what not. hopefully it will arrive in a week or 2.
    2009 KTM 525XC #841

    Brad Mulvey Mod SX arms, SX axle, SX brake lines, KTM Big Nerfs, KTM Hood, Motoworks SR4 slip on, akro manifold, ESR heat gauge, 42mm bored carb, hrc kit, YFZ float bowl w/ adjustable leak jet, FCI "like" Intake w/ RC-5000 K&N filter.
    Reply With Quote Reply With Quote
  14. 02-04-2012 08:44 PM #14
    rumlesj1 [OP]
    rumlesj1 is offline
    Senior Member KTMATVHQ Addict
    rumlesj1's Avatar
    Join Date
    Jun 2010
    Posts
    674
    just an update, got my sprocket in and installed. its a 35 tooth from sidewinder Krause racing. its made of aluminum and costed 130 bux, a bit on the pricey side but its what i needed. only downside of the 35 is that there isnt enough room to get the sprocket over the hub, so basically u need to remove the axle to install.
    2009 KTM 525XC #841

    Brad Mulvey Mod SX arms, SX axle, SX brake lines, KTM Big Nerfs, KTM Hood, Motoworks SR4 slip on, akro manifold, ESR heat gauge, 42mm bored carb, hrc kit, YFZ float bowl w/ adjustable leak jet, FCI "like" Intake w/ RC-5000 K&N filter.
    Reply With Quote Reply With Quote

 
« Previous Thread | Next Thread »

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Search tags for this page

2008 yfz 450 removing rear sprocket

,

2009 ktm 450 sx atv rear spocket 37t

,

34 or 35 toothe rear sprocket for 05 yfz450

,

35 tooth rear sprocket for a yfz

,

505 sx atv

,

ktm 450 removing rear sprocket

,

ktm 525 quad rear sprocket settings

,

ktm 525 xc sprocket

,

ktm 525 xc sprocket rear 35t

,

ktm 525xc rear sprocket

,

ktm atv rear 37 teeth

,

ktm quad rear sprocket

,

sprocket renthal atv 450 505 sx 36t

,

what sprocket does a ktm xc 450 quad have

,

what tooth sprocket i good for xc atv racing

Click on a term to search for related topics.
All times are GMT. The time now is 01:23 AM. Powered by vBulletin® Version 4.1.4
Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO ©2011, Crawlability, Inc.