pipe shoot-out

[Fast64ranchero]

HMF over mod'd can, nice gains from mid to top

CT over mod'd can, nice gains on the bottom and top, longer overall curve

DASA picked up big on the bottom

enjoy,

[homdaddy]

i wonder how the dasa would do with a different head pipe

[bradmulvey]

Ya that HMF is a rockstar! Thats CRAZY!!!! Cheapest pipe wins

[Kill The Monster]

I think I said something about the SX being a 51 hp machine on a real dyno.

[driver311]

I think I said something about the SX being a 51 hp machine on a real dyno.

My sx did 51whp but this is a xc with 41mm carb and pipes.

[driver311]

i wonder how the dasa would do with a different head pipe

The dasa actually did a touch better than that. I printed the wrong graph. Ill post the right graph.

Here it is. Mods or ranch please replace the dasa graph with this one. THanks

[Kill The Monster]

My sx did 51whp but this is a xc with 41mm carb and pipes.

my bad. I saw the 41 fcr and just assumed because most guys run stock carbs.

[nick0]

lets get this right, a HMF pipe/slip on, will get me 51 ponies on a stock 450 xc? starting my superbowl party early, makin sure my eyes are workin

[trailrunner]

lets get this right, a HMF pipe/slip on, will get me 51 ponies on a stock 450 xc? starting my superbowl party early, makin sure my eyes are workin

Slow down, his is a 525XC not a 450XC

[nick0]

Slow down, his is a 525XC not a 450XC

so, my vision is worse. i should not expect this on a stock 450? just trying to way my options on gettin a pipe or not. that all. go cards. coming from a indy native

[trailrunner]

so, my vision is worse. i should not expect this on a stock 450? just trying to way my options on gettin a pipe or not. that all. go cards. coming from a indy native

No, on a stock 450 with a pipe you might see 40-42hp at the tires. Now if you clean up the cylinder head, larger valves, add a cam and larger carb then you can see 50hp in a 450XC.

[driver311]

No, on a stock 450 with a pipe you might see 40-42hp at the tires. Now if you clean up the cylinder head, larger valves, add a cam and larger carb then you can see 50hp in a 450XC.

I think thats a little conservative. Id say 45whp with modded stock can and jetted right. Then add 41mm bore to the carb and hmf full system and youll probably see around 48-49whp and 36ftlbs. Itll run alot better. Dont you agree Walt?

[ktm450xc]

I think thats a little conservative. Id say 45whp with modded stock can and jetted right. Then add 41mm bore to the carb and hmf full system and youll probably see around 48-49whp and 36ftlbs. Itll run alot better. Dont you agree Walt?

We dyno one of our 450xc with CT pipe and different cam, got 47whp . Next month we will be putting the second 450xc with motor work, bored carb 43mm/dial a jet, cam, twin air filter/power flow cage/No Toil, CT pipe with 20 disk (stoke is 14 disk), case vent check valve, open air box and Baldwin oil cooler. Waiting for it to warm up alittle so it will be ready for the Extreme Dirt Track Series.

After second dyno, will post both results.


[attachment=1242:Copy_of_P1010192.JPG]

[nick0]

trailrunner & driver, my eyes are workin better, i understand now. thanks for the info.

[Fast64ranchero]

+1 Driver,

[trailrunner]

What are the differances between just the HMF slipon and the slipon with new header pipe?

[driver311]

What are the differances between just the HMF slipon and the slipon with new header pipe?

We didnt have a hmf slip on to test. im guessing it will look alot like the dasa did, maybe a touch less because the core is a little smaller.

[KTM RIDAA]

We didnt have a hmf slip on to test. im guessing it will look alot like the dasa did, maybe a touch less because the core is a little smaller.

what about the trinity pipe?? i called them and they said 10 hp all the way around. anybody have their pipe?? im thinking about getting it.

[Deadman]

HMF sure makes power where you use it!

[japple226]

what about the trinity pipe?? i called them and they said 10 hp all the way around. anybody have their pipe?? im thinking about getting it.

10 HP. I'll have to see it to believe it.