+ Reply to Thread
Results 1 to 11 of 11
  1. #1
    Senior Member KTMATVHQ Addict
    Join Date
    Feb 2008
    Location
    Southern Illinois
    Posts
    532

    Trade my ltr's for your sx's

    Two 08 Ltr 450's.....race bike fully built by walsh, same as lawsons. Other bike - stock motor with hotcams, walsh arms, fox shoxs all the way around, dwt wheels/tires, carb kit. Both quads are freshLooking for sx's with similar mods or at least aftermarket suspension

  2. #2
    Member Rookie
    Join Date
    Nov 2010
    Location
    Pearl River, LA
    Posts
    75
    Sound like nice bikes. Pics might gather more interest than just the post. Whats steering you back to ktm?

  3. #3
    Member Rookie
    Join Date
    Jun 2009
    Location
    carthage, TN
    Posts
    37
    i have a 450sx with pep pb1 all the way around full baldwin race motor and carb rpm axle ktm full exhaust and more take $4500 for it just switched to hondas
    1

  4. #4
    Member Rookie
    Join Date
    May 2009
    Posts
    86
    Canixon21 shoot me a pic of your Ktm 716-680-1649

  5. #5
    Junior Member Rookie
    Join Date
    Dec 2011
    Posts
    12
    canixon21 send me a pic of the ktm450sx to 870-636-9295

  6. #6
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,752
    zuki's to slow.............
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........

  7. #7
    Junior Member Rookie
    Join Date
    Dec 2011
    Posts
    12
    but they are the best handling

  8. #8
    Senior Member KTMATVHQ Member

    Join Date
    Aug 2009
    Location
    Hatfield,Pa
    Posts
    396
    Quote Originally Posted by huntertaylor98 View Post
    but they are the best handling
    Yea......Ok......
    '08 525 XC
    Fast64Ranchero's Carb Mods
    FCI Intake
    RocketRon's Tripple Rate Fronts and Dual Rate Rear
    KTM Bill's Axel Nut
    Jagg 6 row oil cooler/PB adapter/Jagg by-pass valve
    7602 Racing's T6 carb filter
    15 Tooth Front Sprocket
    Custom Dash Relocation
    PRM .190 Aluminum engine skidplate
    KTM Nerfs w/heel guards

  9. #9
    Senior Member KTMATVHQ Addict
    Join Date
    Feb 2008
    Location
    Southern Illinois
    Posts
    532
    Canix shoot pix to higgerson665@gmail.com

  10. #10
    Senior Member KTMATVHQ Addict
    Join Date
    Feb 2008
    Location
    Southern Illinois
    Posts
    532
    refreshening!! bump!!

  11. #11
    Junior Member Rookie
    Join Date
    Mar 2009
    Location
    Utah
    Posts
    12
    have two mx built sx's, need more info on ltr's. throw some pics and mod list motor builds up. thx
    #291

    ITP EXPERT/Pro Am

    2009 KTM 450SX (maier hood, Streamline Stabilizer, Pro Taper Gurads, Zbroz EXIT Front and Rear ZPS shocks, DWT beadlocks)

    2008 YFZ450 (maier hood, renthal bars, PEP front shocks, Stock rear shock, DWT beadlocks, tusk guards, pro design kill, Laeger long travel arms, durablue axle.)

    2009 Sponsors: The Edge Motosports, EVS, Magura, SMX Optics, Osiris Shoes.

    Series: ITP Quadcross, RMR, USRA, Casino Town, Wild West Nat., WORCS


 

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts