+ Reply to Thread
Results 1 to 10 of 10
  1. #1
    Junior Member Rookie
    Join Date
    Apr 2008
    Posts
    3

    SX505 Complete rolling chasis NO ENGINE

    Engine failure resulted in the sale of this 09 SX505. Quad has only 45 hours. Everything but engine included. Great condition. Drop in a SX450/505 quad engine. XC450/525 quad engines should work with minimal modification, also, KTM SX or XC bike engine may fit with minimal modification, owner must verify. Or finally build that "monster quad" project with a streetbike or snowmobile engine (serious fabrication required). Or use for spare parts!
    Serious inquires only please. Contact Jason at 623-523-7668, located in Scottsdale AZ. $ 2,250. Also, I have many spare parts available for this quad available for additional $. Engine had low hours and ran great but studs stripped out of sidecase. Engine is disassembled and can be parted out for $.

  2. #2
    Member Rookie
    Join Date
    Dec 2008
    Location
    Fresno,CA
    Posts
    89
    If you come down on the price I'd be interested....let me know if it doesn't sell
    2009 KTM 450SX PEP PB1,PEP ATB,JD Racing,KTM Bill's Pipe,DRG Head/Carb,KTM Hardparts,SX-F CDI, AFP Soft Bars, Ohlins SS
    2009 KTM 450SX PEP PB1, PEP ATB, JD Racing, SX-F CDI
    2009 KTM 505SX FMF 4.1, KTM Hard Parts, Ohlins SS
    2009 YFZ450R
    2006 YFZ450 Houser,Elka,LSR,Pro Design,Fasst,AC Racing,Hiper,Maxxis,NMotion,Athena,Hinson,Wave & more
    2008 BBR/KLX 110 Everything you could possibly do and then some.....

  3. #3
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,576
    Price includes the sx engine ?
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Wlash Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: SXS 560 light weight 72mm crank, balanced, with DJH pressure feed stator main bearing, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........

  4. #4
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,576
    Pm me pics and detsils plse
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Wlash Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: SXS 560 light weight 72mm crank, balanced, with DJH pressure feed stator main bearing, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........

  5. #5
    Senior Member KTMATVHQ Addict
    Join Date
    Jan 2011
    Location
    Bella vista ,arkansas
    Posts
    648
    I have a good xc motor for it kiwi. Lol
    570 kit
    8/09 cam
    plus 1 head and ported by a secret
    slingshot lock up
    fci intake, 43.5 carb
    plus 4 swingarm
    ktmbill exhaust
    JJ&a play axle
    high flow water pump

    http://s1194.photobucket.com/albums/...1318109035.jpg

  6. #6
    Member Rookie
    Join Date
    Nov 2010
    Location
    Pearl River, LA
    Posts
    73
    pm me the details also if you would.

  7. #7
    Junior Member Rookie
    Join Date
    Nov 2011
    Posts
    15
    intersted in the rims, tires and sx arms if your willing to part it out?

  8. #8
    Senior Member KTMATVHQ Addict
    Join Date
    Jan 2011
    Location
    Bella vista ,arkansas
    Posts
    648
    time to give up on the post he hasnt been back on here sense the thread started
    570 kit
    8/09 cam
    plus 1 head and ported by a secret
    slingshot lock up
    fci intake, 43.5 carb
    plus 4 swingarm
    ktmbill exhaust
    JJ&a play axle
    high flow water pump

    http://s1194.photobucket.com/albums/...1318109035.jpg

  9. #9
    Member Rookie
    Join Date
    May 2009
    Posts
    67
    I bought the motor from him. Have to text him seems like a good guy to deal with.

  10. #10
    Member Rookie
    Join Date
    Apr 2008
    Location
    Port Alberni B.C. Canada
    Posts
    94
    I just bought the chasis without wheels so he still has wheels left. You have to phone or e-mail him.
    Tom


 

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Search tags for this page

ktm 505 egine for sale

Click on a term to search for related topics.