+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Member Rookie
    Join Date
    May 2011
    Posts
    34

    Just getting comfortable enough to Jump

    I have been a dirtbike trail rider for almost ten years. I just started into quads and have logged 4hrs on my 450xc, and just recently started riding on a broken down, unmaintained race track. I got enough guts to start jumping and have tweaked a couple things like, thottle on the launch, and its been getting better. But on my really good launches, when I am up in the air I feel my bike pull ahead of me and my boots slide back from the pegs until they hit the heel guards on the nerf bars. So any Ideas on what I am doing wrong?

  2. #2
    Senior Member KTMATVHQ Member
    Join Date
    Nov 2010
    Location
    iowa
    Posts
    470
    when i take off i tend to let the bike absorb into me i guess. when i do that my feet do not come off of the pegs. you dont go as far though, so if your doing doubles watch out before you try it.
    -08 KTM 450xc - sx arms, high flow water pump, Quadtech hood, FMF factory 4.1 with megabomb, KTM large bumper, Rath nerfs, 806 cam, Ranchero carb mods, Kiwi spring mod.

    -09 KTM 450sx - Quadtech hood, Flex bars, KTM hardparts FMF slip-on, Pro-Armor nerfs,KTM large bumper, high flow water pump, Ranchero carb mods, Kiwi spring mod.

    -400ex - motoworks slip on, tusk front bumper and nerf bars.

    2012 Sponsors - Motosport.com, Leatt Brace, Twin Air, Thede Photography.

  3. #3
    Administrator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,752
    grip your boots tighter into the side of the quad and use your knees as suggested above
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........

  4. #4
    Moderator KTMATVHQ Guru
    Join Date
    Feb 2008
    Location
    Lindsay, ON
    Posts
    1,015
    tons of beginner riders, including myself only a few years ago, tend to lean too far back off jumps. Try to stay in the attack position with your chin over the bars and dont let your legs straighten out
    Ben Hodgson-#84

    09 450SX(race) black hipers orange and white PCed a-arms, akro slip-on, KTM case saver key relocator, fastranchero carb mods, flexx bars, pro armor nerfs, KTM bumper, AC grab bar, FW carbon white hood, dirtbike CDI FCI intake, FW seat.

    09 450SX(praccy)
    orange hipers, custom ignition relocator FMF Pipe, Big Nerfs, Fox Float X Evol DSCs, Podium rear shock, KTM Big Bumper, razrs, dirtbike CDI, FCI intake

    08 450xc(sold)
    hipers w/ orange beadlocks, ohlins damper, KTM bumper, KTM nerfs w/ heel guards, KTM frame guards, KTM billet brake and clutch master cylinder covers, KTM case saver, ODI grips, KTM +2 a-arms, FLEXX Bars, Walsh stem, Powermadds, Hindle pipe, Holeshot SXs, Maier hood, quad tech hump seat

    Thanks to my 2010 sponsors

    KTM Canadawww.ktm.ca
    HB Cycle http://www.hbcycle.com
    Parts Canada http://www.partscanada.com/
    Race Toyota http://race.toyota.ca/dwp/experience/en/home/index.jsp
    TEKrider TEKvests http://www.tekrider.com/
    Fourwerx Carbon http://www.fwcarbon.com/
    Motovan http://www.motovan.com
    Mission Cycle http://www.hiperracingwheels.com/
    smith optics http://www.smithoptics.com/
    fly racing http://www.flyracing.com



    MOM AND DAD LOL


 

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Tags for this Thread