this is after the first ride. i have MANY mods planned....
Thank you to my sponsors:
Rath Racing, Larson's Cycle, Rocketshop, DWT, FLY Racing, Fourwerx, Hinson, ASV, Thede Photography, CP Pistons, Ready Racing, Tekbolt, Engine Ice, Galfer, Hoosier Tire
A few more bits added.
![]()
If it's not upside down, you're not trying hard enough!
pics of me on my ktm 450 quad at buddscreek maryland
nerfs off my yfz 450 custom fit dc racers bligstars
took fenders off adjusted shocks
extended out the axle
flipped handle bar clamps
flipped the carrier so the rear is closer to the ground
KTM large nerfs...powdercoated
KTM front bumper
KTM frame guards
Relocated Key/light console
Lowered 1" with extended rear axle
Powdercoated engine mounts
Powdercoated Hubs/screens
Re-jetted w/fuel screw turned 2.5 times
snorkel removed
2008 525 XC: 53+ whp, 37+ torque
Frame:
-Large KTM Nerfs PC'd black
-KTM Front Bumper
-KTM Frame guards
-KTM Factory graphics kit
-HID headlamp
-Laeger's +2 A-Arms w/streamline brake line clamps
-PC'd subframe, shifter & brake lever, grab bar, rear brake caliper,motor mounts,front/rear hubs & spacers
Motor:
-Welded head pipe/flange piece
-Open Air box
-Stock exhaust mod with 1 3/4in. exhaust outlet
-Hotcams stage one
-Sredrum 42mm carb bore
-Venom head port
Here is one in Iceland, 525xc
KTM nerf bars
KTM Hand quards
Waiting for my FMF slip-on , shock covers and factory graphics
It´s simply the best
<sub><sup>Eyvi</sup></sub>
525 xc
Jd jetting
FmF slippon
Hey nice pic man! and btw, welcome to ktmatvhq.com![]()
Where's the surf?![]()
If it's not upside down, you're not trying hard enough!
Thank you.
We have a lot of black sand beach here, and some are like dunes, we ride a lot in that kind of places. This summer it´s all about racing, actualy this summer is the first time there will be some race for atv´s, hahaha yeah you heard right!! so i have a lot to read i see for some suspension adjustments and stuff, i will post more pictures later with more black sand and icelandic landscape.
Thank you
<sub><sup>Eyvi</sup></sub>
525 xc
Jd jetting
FmF slippon
2008 525 XC: 53+ whp, 37+ torque
Frame:
-Large KTM Nerfs PC'd black
-KTM Front Bumper
-KTM Frame guards
-KTM Factory graphics kit
-HID headlamp
-Laeger's +2 A-Arms w/streamline brake line clamps
-PC'd subframe, shifter & brake lever, grab bar, rear brake caliper,motor mounts,front/rear hubs & spacers
Motor:
-Welded head pipe/flange piece
-Open Air box
-Stock exhaust mod with 1 3/4in. exhaust outlet
-Hotcams stage one
-Sredrum 42mm carb bore
-Venom head port
Those are for sure the new KTM Hydrotek pants 2008![]()
They're waterproof and seem very good quality.
[attachment=587:ktm_pant...droteq08.jpg]
those look sweet? do they have zip off legs? a must for me in the hot texas heat!
A few pictures after surgery....
[attachment=598:IMG_4033.JPG][attachment=599:IMG_4034.JPG]
[attachment=600:IMG_4035.JPG][attachment=601:IMG_4037.JPG]
[attachment=602:IMG_4038.JPG][attachment=603:IMG_4039.JPG]
[attachment=604:IMG_4040.JPG]
Those pegs are nice, what brand?![]()
Here's mine that I use for desert racing D-38
Upgrades:
KTM nerfbars
Custom seat
Tusk hand guards
Pro taper bars w/risers
Rear shock revalved
Light bar
Front bumber
Baja wheels
Maxis 22 & 23in tires[attachment=635:Picture_166.jpg][attachment=636:010608_4.jpg]