+ Reply to Thread
Results 1 to 18 of 18
Like Tree1Likes
  • 1 Post By 5.0fox

Thread: ASi silicone hoses sets for XC - eliminates thermostat but keeps second port on cylin

  1. 08-02-2011 09:07 AM #1
    kiwi-craig [OP]
    kiwi-craig is offline
    Administrator KTMATVHQ Guru
    kiwi-craig's Avatar
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,752

    ASi silicone hoses sets for XC - eliminates thermostat but keeps second port on cylin

    major manufacturer, looks like a nice product at a good price, orange, red, black and blue:

    ATV KTM 450XC 525XC silicone radiator Y HOSE KIT Blue | eBay

    ASI hoses.jpg

    quality ? anyone tried these ?? CV4 hose set = $180, Samco (UK) $130, ASI $65 direct form manufacturer
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........
    Reply With Quote Reply With Quote
  2. 08-02-2011 10:28 PM #2
    amquadracing
    amquadracing is offline
    Senior Member Member
    amquadracing's Avatar
    Join Date
    May 2009
    Location
    N.Ireland
    Posts
    198
    SFS performance (UK) also do a 2pc Y kit, it retails at £70.00GBP

    Quality is 1st class!, I run SFS on all 3 of my ktms, all very good fit and top quality.

    SFS Performance - Silicone Hoses
    Fintona Auto Spares / Wayne Mounter Motorcycles KTM 525XC

    Fintona Auto Spares / Wayne Mounter Motorcycles KTM 540SX

    Fintona Auto Spares / Wayne Mounter Motorcycles KTM 505SX
    Reply With Quote Reply With Quote
  3. 08-03-2011 01:08 AM #3
    bferg911
    bferg911 is offline
    Senior Member KTMATVHQ Addict
    bferg911's Avatar
    Join Date
    Sep 2008
    Location
    Henderson, Nv
    Posts
    951
    Send a message via Yahoo to bferg911
    Asi is from China!! I do everything possible not to buy shit from China!!!
    08 525 XC -mine SOLD
    05 Yfz 450- wife SOLD

    08 Raptor 250- Daughters SOLD

    10 Raptor 250- Daughters SOLD


    Heavy Equipment Mechanic- Vermeer
    Reply With Quote Reply With Quote
  4. 08-03-2011 05:20 AM #4
    kiwi-craig [OP]
    kiwi-craig is offline
    Administrator KTMATVHQ Guru
    kiwi-craig's Avatar
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,752
    mate - you better check a hell of allot of ya stuff then, you'd be surprised whats made there.......... like major parts for Boeings new 787...............
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........
    Reply With Quote Reply With Quote
  5. 08-03-2011 06:45 AM #5
    5.0fox
    5.0fox is offline
    Senior Member KTMATVHQ Addict
    5.0fox's Avatar
    Join Date
    May 2009
    Location
    Western WA
    Posts
    520
    As a Boeing employee I can verify what kiwi says is correct. Quality parts can come from China its just not all that common
    basketballl00011 likes this.
    New dune build in progress: Thumper racing 570 with 13.5:1 CP piston, DJH big valve head with kibblewhite valves and springs, DJH 44mm fcr, Thumper racing stage 6 cam, Slingshot clutch lockout with EBC springs,EHS airbox vent, FCI intake and HMF exhaust.

    Looking for a +4 swingarm and 22" 8 paddle sls haulers
    Reply With Quote Reply With Quote
  6. 08-03-2011 04:22 PM #6
    bferg911
    bferg911 is offline
    Senior Member KTMATVHQ Addict
    bferg911's Avatar
    Join Date
    Sep 2008
    Location
    Henderson, Nv
    Posts
    951
    Send a message via Yahoo to bferg911
    I know Craig, but like I said. I do everything possible not to. It gets harder and harder as company sellout to cheap labor but I do what I can. The day that China starts trading fairly in equal tarrifs and what not, is the day I will stop bitching. Not to mention how much shit they copy. It's friggin rediculous!!! Just me venting guys.
    08 525 XC -mine SOLD
    05 Yfz 450- wife SOLD

    08 Raptor 250- Daughters SOLD

    10 Raptor 250- Daughters SOLD


    Heavy Equipment Mechanic- Vermeer
    Reply With Quote Reply With Quote
  7. 08-03-2011 06:50 PM #7
    kiwi-craig [OP]
    kiwi-craig is offline
    Administrator KTMATVHQ Guru
    kiwi-craig's Avatar
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,752
    no probs, we all know what ya saying, if they actually did some R&D and product development instead of freeloading and gave a half rats arse about the environment prices would be very different........
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........
    Reply With Quote Reply With Quote
  8. 08-04-2011 12:12 AM #8
    AZ450XC
    AZ450XC is offline
    Senior Member KTMATVHQ Guru
    AZ450XC's Avatar
    Join Date
    May 2009
    Location
    Arizona
    Posts
    1,209
    That picture of them does look identical to my CV4 hoses, even how the upper hose going into the Y tapers to a smaller size. I'm sure they are exactly the same.
    2012 Sponsors: DWT, Motoworks, Rath Racing, Fasst Company, BioTearOffs, Twin Air, BRM Offroad Graphics, GoPro, Arizona Motocity, Leatt Brace, FourWerx Carbon, Motorex USA.
    Reply With Quote Reply With Quote
  9. 08-04-2011 03:43 AM #9
    STEELEMAN
    STEELEMAN is offline
    Junior Member Rookie
    STEELEMAN's Avatar
    Join Date
    Jul 2011
    Location
    portland, oregon
    Posts
    10
    Just put a set on my 660 raptor, quality is really good. only a cosmetic problem the ASI emblims are an engine side of hose no biggie. oh yeah cut open the bag and they stink really bad like rotten feet, no joke. but they fit and work great and will buy a set if need be.
    Reply With Quote Reply With Quote
  10. 08-04-2011 08:49 PM #10
    kiwi-craig [OP]
    kiwi-craig is offline
    Administrator KTMATVHQ Guru
    kiwi-craig's Avatar
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,752
    good to hear from some one who has actually used the product. I think I'm gonna get a set for the 608, only $20 to ship to NZ........ excellent.
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........
    Reply With Quote Reply With Quote
  11. 09-22-2011 06:36 AM #11
    sandshredder
    sandshredder is offline
    Senior Member Member
    sandshredder's Avatar
    Join Date
    Feb 2011
    Location
    oregon
    Posts
    123
    kiwi...did you get a set of these yet? if so, got pics?
    Reply With Quote Reply With Quote
  12. 10-01-2011 11:00 PM #12
    SIDCON
    SIDCON is offline
    Member Rookie
    SIDCON's Avatar
    Join Date
    Feb 2010
    Posts
    59
    Do they make these for the 450SX atv. I bought a set of CV4 for a friend and he ended up not paying for them so I decide to use them. I tried putting them on and they don't fit! they rub rite on the exhaust. Im looking for an alliterative.
    Reply With Quote Reply With Quote
  13. 10-02-2011 01:27 AM #13
    kiwi-craig [OP]
    kiwi-craig is offline
    Administrator KTMATVHQ Guru
    kiwi-craig's Avatar
    Join Date
    Feb 2008
    Location
    Auckland, New Zealand
    Posts
    2,752
    SFS Performance - Silicone Hoses

    http://www.samcosport.com/usa/bike_kits.asp?make=KTM
    KTM 505 SX: Web cams / 13.5:1 custom CP / balanced and modded crank / custom Vortex X10 ignition / Ported head / 43.5mm billet centre bored carb / KTM Akrapovic muffler / Mino hi vol water pump / 12 deg flexx's / houser stem / elka 5 / PEP PB1's and PEP LT rear / Walsh Flow A Arms / Quad tech seat & Foam / CF nose / FCI intake / relocated batt box / KTM Bill header / KTM factory SS Oil Pump setup / DJH cam chain tensioner
    Next round of mods: oil cooler........ the NEW TOP DOG

    KTM 560 XC: 560 sx style light weight 72mm crank by cut 7, balanced, with DJH pressure feed drive side main bearing setup, DJH stator main bearing oiler, light weight SXF flywheel, TT SXF stator - Swartfager billet stator adapter, DJH cam chain tensioner , Thumper racing 99mm CP with ceramic coating, DJH plus 1 ported head / Travis STG 5 billet cam, 44mm carb. Mino hi vol water pump. KTM Bill custom exhaust, FCI intake, JB A Arms, Wp's front and Rear with Kiwi ZPS suspension, Lonestar axle, 12 deg Flexx's, CF nose, elka 3 steering damper, KTM factory nerfs, factory white plastic and graphics.
    Next round of mods: PB oil cooler........

    gotta stop spending $$$ on these KTM's........

    LTR 450, My Wife Nicola's ride & my back up mxer - 493 BB / JE piston / Yoshi cams / custom fueling map / tcs LT ZPS front end setup, TCS rear ZPS revalve / ims tank / TB exhaust / power commander / proflo - K&N / 14 deg flexx's / race nerfs / armadillo bumper/ Denton damper, next round of mods: ported head...... the clark kent of the ATV trio ! 150hrs and still going strong ! the BB kit transformed this machine, it hauls the mail now !!!!

    A garage full of wheels and tires for them all........ speedway / sand / MX / cross country, over 30 at last count all on rims ready to rock

    NZ Vets (40+) North Island MX champ 08 & 09
    NZ Vets (40+) TT champ 06, 08 & 09
    Auckland ATV Club Sprint Series Champ 04, 05, 06, 07, 08, 09 & 11

    hope to get a good season in for 2012.........
    Reply With Quote Reply With Quote
  14. 11-12-2011 01:22 PM #14
    5lblmbn2009
    5lblmbn2009 is offline
    Senior Member KTMATVHQ Member
    5lblmbn2009's Avatar
    Join Date
    Nov 2010
    Location
    iowa
    Posts
    470
    Is there a benefit to running silicon hoses over the stock ones?
    -08 KTM 450xc - sx arms, high flow water pump, Quadtech hood, FMF factory 4.1 with megabomb, KTM large bumper, Rath nerfs, 806 cam, Ranchero carb mods, Kiwi spring mod.

    -09 KTM 450sx - Quadtech hood, Flex bars, KTM hardparts FMF slip-on, Pro-Armor nerfs,KTM large bumper, high flow water pump, Ranchero carb mods, Kiwi spring mod.

    -400ex - motoworks slip on, tusk front bumper and nerf bars.

    2012 Sponsors - Motosport.com, Leatt Brace, Twin Air, Thede Photography.
    Reply With Quote Reply With Quote
  15. 11-17-2011 03:12 AM #15
    sandshredder
    sandshredder is offline
    Senior Member Member
    sandshredder's Avatar
    Join Date
    Feb 2011
    Location
    oregon
    Posts
    123
    BLING!!!! thats gotta be good for at least 5 hp!
    Reply With Quote Reply With Quote
  16. 11-17-2011 04:28 AM #16
    RDCooper4
    RDCooper4 is offline
    Senior Member Member
    RDCooper4's Avatar
    Join Date
    Mar 2011
    Location
    KS
    Posts
    145
    yeah and each sticker you put on adds another 2 horse....
    Reply With Quote Reply With Quote
  17. 11-17-2011 12:45 PM #17
    5lblmbn2009
    5lblmbn2009 is offline
    Senior Member KTMATVHQ Member
    5lblmbn2009's Avatar
    Join Date
    Nov 2010
    Location
    iowa
    Posts
    470
    k lol. thats what i figured. and for power like that i might have to get some.
    -08 KTM 450xc - sx arms, high flow water pump, Quadtech hood, FMF factory 4.1 with megabomb, KTM large bumper, Rath nerfs, 806 cam, Ranchero carb mods, Kiwi spring mod.

    -09 KTM 450sx - Quadtech hood, Flex bars, KTM hardparts FMF slip-on, Pro-Armor nerfs,KTM large bumper, high flow water pump, Ranchero carb mods, Kiwi spring mod.

    -400ex - motoworks slip on, tusk front bumper and nerf bars.

    2012 Sponsors - Motosport.com, Leatt Brace, Twin Air, Thede Photography.
    Reply With Quote Reply With Quote
  18. 11-18-2011 12:57 AM #18
    sandshredder
    sandshredder is offline
    Senior Member Member
    sandshredder's Avatar
    Join Date
    Feb 2011
    Location
    oregon
    Posts
    123
    mine just came in the mail. looks pretty good. i havent put them in yet. i think i'll wait for when i do a big bore.
    Reply With Quote Reply With Quote

 
« Previous Thread | Next Thread »

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Search tags for this page

2011 ktm 450 xc-w thermostat bypass silicone hoses

,

asi hoses

,
asi ktm xc 450
,

asi silicone hoses

,
asi silicone hoses problem
,
asi silicone radiator hoses ktm
,
atv silicone hose
,
factory ktm silicone hose kit doo xc
,
ktm 525 silicone hoses thumper
,
ktm 525 xc silicone hose
,
ktm 525 xc w silicone hose kit
,
ktm atv asi hose
,
ktm+atv forum
,
silicone y hose
,
www.asisilicone.com
Click on a term to search for related topics.
All times are GMT. The time now is 06:45 PM. Powered by vBulletin® Version 4.1.4
Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO ©2011, Crawlability, Inc.